No, the Replacement Safety Straps for TruXedo Lo Pro and TruXedo Deuce Soft Roll-up Tonneau Cover # TX1118185 is not adjustable, the straps are sewn on either end of itself.
I spoke with TruXedo and they confirmed that they do not carry an adjustable safety strap either. view full answer...
There is not a backup/observation camera that can be viewed on the factory screen of your 2023 Chevy Silverado 1500, so you do need to get a camera with its own monitor. Reason for that is these cameras are not able to pair with your truck, or have wiring that can be spliced into your monitor. If you are okay with that and still want a backup/observation camera, go with the Furrion Vision S Wireless RV Backup Camera System # FOS05TASF.
This has a nice, 5 inch touchscreen so it's easy to... view full answer...
Let's start with the vehicle guard for your 2020 Chevy Silverado 1500, and while there is protection you can add, the Blue Ox guard you mentioned won't work with the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676. The only protective shield that will work for this tow bar is the Roadmaster Tow Defender Protective Screening # RM-4750.
I have added a link below to a video review of this screen for you to take a look at.
In regards to the Blue Ox Patriot # BLU37TR, since... view full answer...
The issue you are having definitely could be that the LED trailer lights aren't pulling enough power for your 2019 Chevy Silverado to read the lights are connected, causing the message you are seeing. That's more than likely what is happening, and there's a couple options for you.
- Trailer Connector Adapter with Lamp-Out Sensor Bypass # 20142
- 7-Way Trailer Adapter for Trailers with LED Lights # C57003
Either of these will do the job for you if the issue is the LEDs not pulling enough... view full answer...
We don't have any way of knowing what replacement lens is needed for any trailer, including a 1985 pop-up, and realistically with a trailer of that age you'll likely have to replace the light altogether. It's pretty simple to do though, as you just need to find one that is approximately the same size.
For example, if your lights were about 8" x 3" you could go with the Aero Pro Combination Trailer Tail Light - Driver Side # ST37RB and Passenger Side # ST36RB.
I have added a link below... view full answer...
Both the Superchips Dashpaq Performance Tuner, Item # SU2060, and the Edge Gas Evolution CS2, Item # EP85350, will work with your 2017 Chevrolet Silverado 1500 High Country 6.2L. They both can boost your horsepower, torque, and fuel economy depending on the programming. For maximum performance with either system, use the recommended octane gas (probably 91 or higher).
Both tuners have options when it comes to your Chevrolet Silverado 1500. Depending on which tune you choose, you... view full answer...
We have not test fit the Yakima 60" HD Tracks for Roof Racks, OverHaul HD, and OutPost HD # Y74MR on a 2022 Chevy Silverado. That said, they do have wiggle room for positioning, and the cap nuts on the underside are just a 1-1/4" in diameter so they won't take up much space. I've added a link below to the instructions of the # Y74MR which may help decide if these are right for you (the truck bed rail install starts on page 6. view full answer...
Yes, the Gen-Y 3-Ball Mount for 2-Inch Hitch Receivers # 325-GH-054 has a solid steel shank. The solid shank accounts for much of the 19-lb shipping weight of this USA-made 3-ball mount. Overall length is 12-inches. You can refer to the linked side-view photo to see the solid steel shank. Please note that the towing capacities differ for each size of hitch ball. view full answer...
The K-Source Custom Extendable Towing Mirrors - Electric/Heat w LED Signal # KS62135-36G will fit your 2017 Chevrolet Silverado 1500 High Country. Unfortunately, the K-Source Custom Tow Mirrors will not retain the power folding function your 2017 Chevrolet Silverado.
The only option we offer to retain your power folding functionality is the K-Source Snap & Zap Custom Towing Mirrors - Snap On # KS80910 which attach to the end of your existing mirrors. view full answer...
I spoke to a tech over at RoadActive Suspension and the # RAS54FR can lift the back of the truck up a little once installed. He did mention that it shouldn't really be noticeable and at most will be about an inch once completed especially on a new vehicle. It can be more if the suspension is getting a bit worn out, however. view full answer...
Since there is no type of cross reference available for taillights on RVs like your 2019 Forest River Grey Wolf 27DBH, in order to figure out how the correct replacement taillight, you will simply need to measure your taillight, which will determine the correct replacement.
Based on some photos I saw, it looks like you may have an Optronics light that measures 8-11/16" long x 3-3/16" tall:
- Driver Side: Low Profile LED RV Tail Light with License Bracket # RVSTLB61
- Passenger Side:... view full answer...
So there is not an option for a backplate/backsplash with the MORryde StepAbove RV Steps for 21-3/4" to 22-1/4" Wide Doorways - 2 Steps # MR86RR.
This was a design choice, however, much like the removable pins; the reason for that is to make it simpler to clean the steps. With steps that have the backplates, cleaning them and sweeping off the dirt that inevitably gets on them is a pain because you can't just sweep it off the back of the step, so dirt tends to linger.
That isn't the case... view full answer...
Excellent questions, and the bottom mirrors are actually spotter mirrors and not convex for the K-Source mirrors that fit your 2018 Chevy Silverado 1500, which are the following part number:
- K-Source Custom Extendable Towing Mirrors - Electric/Heat # KS62147-48G
So what a spotter mirror means is that you will be able to manually adjust it in order to help you with any possible blind spots both when the mirrors are extended and not extended. This allows you the best possible view no... view full answer...
Your Brake Buddy, like the Roadmaster Even Brake # RM-9400, needs to have a breakaway switch to properly function. Without a breakaway switch the vehicle that is being towed could cause much more damaged as the brakes would not be activated if the vehicle being towed were to be disconnected.
Nobody ever expects that something will happen to them, but it is always best to go with more safety and ensure that it is all setup correctly. view full answer...
You absolutely need to adjust a weight distribution hitch such as the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37100ET each season when you are towing to ensure the best performance. If you are certain you have the properly rated system this should not be happening because bounce is usually caused by a lack of weight on the trailer.
I recommend trying to re-distribute the loaded weight of your trailer to ensure it is as equal as possible and also take a look... view full answer...
If you don't want to use the 7-Way Vehicle Power Adapter # FR87PR we do have another solution for a voltage stabilizer but I don't have any thoughts on the converter you mentioned because it's not something we have done or have any experience with. But what you can do instead is use the 12V PWM Filter for RV Backup Camera Systems # VGR64VR.
This splices into your Furrion camera's wiring and works to ensure the camera has the proper voltage. view full answer...
The max height adjustment of the Thule Xsporter Pro Truck Bed Ladder Rack # TH500XTB is approximately 30" and you're correct that the minimum height would be 30" minus the length of the bed rails. view full answer...
Though there isn't a mesh available there is absolutely an air deflector for the Buyers Products Over-The-Cab Truck Bed Ladder Rack - Aluminum # 3371501400 or Black # 3371501410.
The Wind Deflector Kit for Buyers Products Truck Bed Ladder Rack # 3371501193 will ensure you have a quieter ride in your 2017 Chevy Silverado. I have added links to video reviews of both the rack and wind deflector for you to check out. view full answer...
The Curt 18-Inch Combo Bar with 2-1/2-Inch Trailer Hitch Receiver # C49511 is a raw-finish fabrication part that is without any type of stops or obstructions inside the tube. Its interior is completely open (and unfinished) all the way through. The unfinished exterior reduces prep time for welding. view full answer...
In most states double towing (towing one trailer behind another) is illegal so you will want to ensure that it is legal in the state you live in and any state you plan to travel in. You will also want to check with Forest River to ensure that the bumper/frame is rated for pulling a trailer and that you won't be voiding any warranties.
That being said, if that all checks out then you would definitely want to go with a frame mounted hitch and not a bumper mounted hitch. If the frame members... view full answer...